Model: HY-T50 for 30w,40w,50w Co2 Laser tubes
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device,High Voltage Power Supply
HY-T50 Laser power supply is used for 30W,40W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber, etc.
50W Laser Power Main Features:
1. Good compatibility: It can be applicable to 50W,40W and 30W Laser tubes manufactured by different Factories
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 25KV.
3. Quick response speed and effect: High performance, large cutting power. It also can prolong Laser tube’s working life
4. This Power Supply has the”TEST” button which can test output laser manually.
1. Easy Control: The start and stop of laser can be easily controlled by TTL level.Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. The Laser power supply has output open circuit protection. Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of Laser power supply because of the bursting of Laser tube, thereby enhancing the life of power supply.
3. This Power Supply has TTL signal indication, water through signal indication and laser output indication.
|Input||Input voltage||AC 220V or 110V(please specify when placing order)|
|Max input power||350W|
|Output||Max output current||3A|
|Max output voltage||DC 25KV|
|Max output current||DC 20mA|
|MTBF(Mean time between failure)||>=10000hours|
|Response speed||<=1ms(from the TTL signal is given to the output current up to 90% of setting current)|
|Withstand voltage||Input-output,input-enclosure:AC1500V 10mA 60s,output cathode is connected with enclosure.|
|Environment||Operating temperature:-10~40degrees, relative humidity:<=90%|
|Cooling||Force air cooling(FAC)|
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser power supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. Our factory have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure the power supply and Laser tube wiring correct firstly, offline the control line and then press the red button TEST to test Laser tube out light or not, this method can be simple judgment power supply is working correctly.
If the Laser power supply appeared problem during this period, we can send Free Pars for your repairing.