Model: HY-W120 for 100W-120W Co2 Laser tubes
Alias: Co2 Laser Generator, Co2 Laser Source,Co2 Laser Device,High Voltage Power Supply
HY-W120 Laser power supply is used for 100W, 120W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber, etc
1) Very wide range of Input Voltage: AC160-AC260V (Against Input Voltage is 220V)
2) Current has high stability: in the range of Input AC160-AC260V, current change rate less than 1%.
3) Good compatibility: It can be applicable to 100W, 120W Laser tubes manufactured by different factories.
4) High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 40KV.
5) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
6) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
7) The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of Laser power supply because of the bursting of Laser tube, thereby enhancing the life of power supply.
8) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
9) The power supply adds a new function, that is timely scene judging which part is damaged, Laser tube or laser power.
10) Application: thick acrylic cut, fabric cut, etc.
|Input||Input Voltage||AC220V or AC110V（to be specified when placing order）|
|Cold Surge Current||≤60A(AC220V Input)||≤30A(AC110 Input)|
|Current Leakage||≤0.7mA（AC220V Input）||≤0.4mA(AC110V Input)|
|Output||Max Output Voltage||DC 40KV|
|Max Output Current||DC 32mA|
|Mean Time Between Failure (MTBF)||≥10000H|
|Response Speed||≤1MA（from the switch Signal is given to the output current up to 90% of the setting current）|
|Control Interface||TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)|
|Pressure-proof||Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.|
|Protection||can work in open-circuit condition for a short time（Require a good protective earthing and avoid arc between the positive and the machine shell）|
|Environmental||Operating Temperature：-10~40℃，Relative Humidity (RH)：≤90﹪|
|Cooling Way||Force-Air Cooling (FAC)|
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser power supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure the power supply and Laser tube wiring correct firstly, offline the control line and then press the red button TEST to test Laser tube out light or not, this method can be simple judgment power supply is working correctly.
If the Laser power supply appeared problem during this period, we can send Free Pars for your repairing.