0086-531-88190005
Product Features
1.Real-time voltage and current digital display, easy to monitor
2. Wide range of input voltage, can be used for any country.
3. Current can be adjusted between 4-7.5A.
4. Excellent efficiency and over current, overload protection and open circuit protection.
5. Integrated design of constant current and trigger module.
Product Pictures
Specification
Input |
Input voltage | AC90V-AC260V |
| AC frequency | 50/60Hz | |
| Cold surge current | ≤60A(AC220V input) | |
| Leaking current | ≤0.7mA(AC220V input) | |
Output |
voltage ripple and noise | <200mV |
| Max output current | DC7.5A | |
| Current ripple and noise | <5% | |
| Temperature drift (half hour running) | <100ppm/℃ | |
| Stability (half hour running) | <0.2% | |
| Efficiency | ≥85%（full load） | |
| Mean time between failure | ≥50000 hours | |
| Withstand voltage | Input-output,output-cover:AC1500V 10mA 60s；output-cover：DC100V 10mA 60s | |
| Protection | over current,overload protection, open circuit protection | |
| Working environment | Working temperature（-10~50）℃, humidity ≤90% | |
| Cooling | Air force cooling | |
| Dimension(mm) | L×W×H= 265× 157× 82 | |
Connectors
1. Input and output connectors
Instructions:
① AC input —— L、N connects 90～260V 50/60Hz AC，PE connects ground② Output —— connects short arc xenon lamp; LAMP- connects cathode of xenon lamp, LAMP+ connects anode of xenon lamp.
2. Screen and buttons
Instructions:
① Screen ——shows company information,trigger mode,output voltage,current,web,etc. ② “SET” ——set “Trigger” model and “SetPoint” mode； ③ “UP” ——increase set current or switch “Auto” and “Manual” trigger mode； ④ “ON/OFF” ——under “Auto” mode, control the output and stop of power supply； ⑤ “Down” ——reduce set current or switch “Auto” and “Manual” trigger mode； ⑥ Company NameInstallation Size
The dimension is L×W×H=265×157×82 (mm), can use M4 screw to install.
Please do not block the ventilation holes and fans when install and fix the power supply.