ZS series Laser tube
Electrode surface, special plating! ——The electrode surface treatment adopts special metal plating to completely
eliminate electromagnetic sputtering and lens pollution, effectively extending the service life of the Laser tube.
Front and rear lens cooling cover, special craft! - Heat-dissipating cover surface oxidation process, high-efficiency
insulation performance, reducing sparking discharge.
Stability: The discharge tube is made of imported glass frit from Germany, and the quality of the whole glass tube
Power: U.S. hollyland total mirrors and output mirrors are used. The highest power is 190 watts, and the output
power density is high.
Long life: The discharge tube coated with catalyst, combined with the electrode treated by unique process,
makes the discharge more stable and the service life is up to 10,000 hours.
Spot: Stable cavity structure, concentrated, stable, good quality, uniform spot pattern and high efficiency.
Process: The product welding line is completely sealed in the ceramic water jacket, completely insulating the air,
effectively preventing high-pressure sparking.
The Laser tube mirror improves the water-cooled ceramic water jacket, and the output mirror is matched with
the copper water jacket of the water cooling system, which effectively reduces the lens temperature and greatly
prolongs the service life of the Laser tube.Product Parameters
Cooling liquid: clean water;
Ambient: temperature: 2°C -40°C; humidity: 10-60%
Service Life: 10,000 hours
Warranty: 360 days
1.Within 180 days from exit works date on the label, we replace free of charge if the power is less than 80% of rated power while the users operate according to our manual. The replaced Laser tube will have same warranty as new ones. The single transportation freight will be afforded by buyer. When the Laser tube structure is damaged or changed, we will not be responsible.
2.From 181st days to the 360th days from exit works date on the label, we repair or replace free of charge if the power is less than 75% of rated power while the users operate according to our manual. The replaced or repaired Laser tube will have same warranty as the one which the buyer purchased first time from us. The single transportation freight will be afforded by buyer. When the Laser tube structure is damaged or changed, we will not be responsible.
3. Our quality assurance does not apply to problems incurred under incorrect usage that do not comply with the instruction book.
Incorrect operation of the Co2 Laser tube may result in different consequences, including a change in color of the negative electrode after long term over-current use, and the service life will be significantly reduced. Please cover the high pressure protective housing with plastic wrap to prevent dust from disturbing the interior electrodes.
Cleaning Tips: Please do not use cotton swabs or other wipes to scrub the transmitting mirror on the Co2 Laser tube. Doing so affects the output power.
The specified cleaning method for the transmitting mirror is as follows
1. When the lens is stained, turn off the Laser tube.
2. Use an air blower to blow away dust and dirt on the lens.
3. Use a syringe to spray ethanol on the lens.
4. After the ethanol evaporates, turn the Laser tube back on.
5. If the above methods do not work effectively, professionals are required, who will use a cotton swab dipped in ethanol to clean the lens in a rotating fashion away from the center, outwards to the edge.The best method is to protect the windows from contamination.
1. Do not use acetone to clean the glass.
3. When testing the light spot on organic glass, please keep the organic glass 300mm away from the transmitting mirror.
Safety: As the C02 glass laser device generates invisible light, please wear eye protection gear when operating. A safety sign for high voltage is marked on the positive pole.
Storage and Transportation Requirements: When storing and transporting the Co2 Laser tube, please drain the cooling liquid and cover the tube ends with dustproof plastic bags. For storage, the required environmental temperature is 2-40CC and the humidity ranges from 10-60%.
Adhesive tapes and sponges should be used to fix the Laser tubes and prevent sliding during transport. A 70mm sponge should be use at the end of the transmitting mirror, and a 50mm sponge should be at the end of the fully reflecting mirror.
The replaced Laser tube warranty is 120 days.