Model: HY-ES80 for 80w Co2 Laser tubes
Alias: Co2 Laser Generator,Co2 Laser Source,Co2 Laser Device,High Voltage Power Supply
HY-ES80 Laser power supply is used for 60W,80W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect.
1. Good compatibility:ES80 Power Supply is special designed for EFR 80w Laser tubes.Also can driver 40w,50w.60w common Laser tubes from other factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 35KV.
3. You can choose Cutting Type or Sculpring Type; the Cutting Type has a good power stability and strong adaptability; the Sculpring Type has a quick response speed and good engraving effect.
4. This Power Supply has the” TEST” button which can test output laser manually.
1. Easy Control: The start and stop of laser can be easily controlled by TTL level.Both 0-5V analog signal and PWM signal can control the laser power.
2. The Laser power supply has output open circuit protection. when the earth connection is under good situation, Power can be short time work in open state, it Can avoid the Laser tube burst damage caused by Laser power supply, prolong the EFR Laser tubes service life.
3. This Laser power supply has TTL signal indication, water through signal indication and laser output indication.
4. The power has feedback interface, can be used for closed-loop control, also can be used for testing the Laser tube working current.
5. It can quickly judge Laser tube is damaged or Laser power supply is damaged at the scene, greatly facilitate the on-site maintenance.
|Input||Input Voltage||AC220V or AC110V（to be specified when placing order）|
|Max Input Power||450W|
|Max Input Curret||5A|
|Output||Max Output Voltage||DC 35KV|
|Max Output Current||DC 28MA|
|Mean Time Between Failure (MTBF)||≥10000H|
|Response Speed||≤1ms（from the switch Signal is given to the output current up to 90% of the setting current）|
|Control Interface||TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)|
|Pressure-proof||Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.|
|Protection||can work in open-circuit condition for a short time（Require a good protective earthing and avoid arc between the positive and the machine shell）|
|Environmental||Operating Temperature：-10~40℃，Relative Humidity (RH)：≤90﹪|
|Cooling Way||Force-Air Cooling (FAC)|
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser power supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure the power supply and Laser tube wiring correct firstly, offline the control line and then press the red button TEST to test Laser tube out light or not, this method can be simple judgment power supply is working correctly.
If the Laser power supply appeared problem during this period, we can send Free Pars for your repairing.