Model:LCX150
Product Features
1.Real-time voltage and current digital display, easy to monitor
2. Wide range of input voltage, can be used for any country.
3. Current can be adjusted between 4-7.5A.
4. Excellent efficiency and over current, overload protection and open circuit protection.
5. Integrated design of constant current and trigger module.
Product Pictures
Specification
Input |
Input voltage | AC90V-AC260V |
AC frequency | 50/60Hz | |
Cold surge current | ≤60A(AC220V input) | |
Leaking current | ≤0.7mA(AC220V input) | |
Output |
voltage ripple and noise | <200mV |
Max output current | DC7.5A | |
Current ripple and noise | <5% | |
Temperature drift (half hour running) | <100ppm/℃ | |
Stability (half hour running) | <0.2% | |
Efficiency | ≥85%(full load) | |
Mean time between failure | ≥50000 hours | |
Withstand voltage | Input-output,output-cover:AC1500V 10mA 60s;output-cover:DC100V 10mA 60s | |
Protection | over current,overload protection, open circuit protection | |
Working environment | Working temperature(-10~50)℃, humidity ≤90% | |
Cooling | Air force cooling | |
Dimension(mm) | L×W×H= 265× 157× 82 |
Connectors
1. Input and output connectors
Instructions:
① AC input —— L、N connects 90~260V 50/60Hz AC,PE connects ground ② Output —— connects short arc xenon lamp; LAMP- connects cathode of xenon lamp, LAMP+ connects anode of xenon lamp.2. Screen and buttons
Instructions:
① Screen ——shows company information,trigger mode,output voltage,current,web,etc. ② “SET” ——set “Trigger” model and “SetPoint” mode; ③ “UP” ——increase set current or switch “Auto” and “Manual” trigger mode; ④ “ON/OFF” ——under “Auto” mode, control the output and stop of power supply; ⑤ “Down” ——reduce set current or switch “Auto” and “Manual” trigger mode; ⑥ Company NameInstallation Size
The dimension is L×W×H=265×157×82 (mm), can use M4 screw to install.
Please do not block the ventilation holes and fans when install and fix the power supply.